A benchtop centrifuge separates suspended material by rotating compatible tubes in a rated rotor; the required RCF, tube format and protocol determine the usable configuration. Typical uses include cell and precipitate separation, blood and clinical sample preparation, and nucleic-acid workflows.
The benchtop drive rotates a compatible loaded rotor, causing denser suspended components to move outward and separate from the liquid phase. Rotor type, tube capacity, RCF and run time should be selected for the intended sample.
Where Benchtop Centrifuge fits
Suitable workflows
Benchtop Centrifuge is commonly shortlisted for Cell and precipitate separation, Blood and clinical sample preparation, and Nucleic-acid workflows. These uses orient the Benchtop Centrifuge enquiry; suitability still depends on the exact model, method and site conditions.
Specify rotor, vessels and RCF
For Benchtop Centrifuge, the enquiry should document Vessel format, working fill level, samples per run and the usual batch pattern and Required RCF and protocol time, calculated with the proposed rotor radius. Acceptance values for the proposed Benchtop Centrifuge should come from the buyer's method, URS or tender rather than catalogue assumptions.
Confirm the complete centrifuge package
Ask for the exact Benchtop Centrifuge model, rotor code, maximum RCF, vessel capacity and compatibility, control range, safety features, included accessories and the applicable test or calibration documents.
Typical applications for Benchtop Centrifuge
Cell and precipitate separation.
Blood and clinical sample preparation.
Nucleic-acid workflows.
General research centrifugation.
Selecting the right Benchtop Centrifuge
Application or load: Vessel format, working fill level, samples per run and the usual batch pattern.
Required performance: Required RCF and protocol time, calculated with the proposed rotor radius.
Configuration and compatibility: Fixed-angle or swing-bucket rotor, buckets, adapters and tube compatibility.
Site, utilities and support: Refrigeration, imbalance protection, aerosol containment and control programme.
Operating limits and safety for Benchtop Centrifuge
Rotor rating, tube rating and RCF must be checked together; RPM alone is not a safe basis for comparison.
Opposing loads must be balanced and damaged rotors, buckets, adapters or tubes removed from service.
Aerosol containment or biosafety accessories are required where the sample risk assessment calls for them.
Documents to review for Benchtop Centrifuge
For Benchtop Centrifuge, information about vessel format, working fill level, samples per run and the usual batch pattern remains qualitative until a quotation ties it to an exact model, included scope and controlled technical document.
Product information scope
Benchtop Centrifuge selection guidance; the exact model is confirmed in the quotation
Model reference
Assigned for Benchtop Centrifuge in the quotation or approved datasheet
To prepare a model-level quotation for Benchtop Centrifuge, provide Vessel format, working fill level, samples per run and the usual batch pattern; Required RCF and protocol time, calculated with the proposed rotor radius; Fixed-angle or swing-bucket rotor, buckets, adapters and tube compatibility; required quantity; delivery and installation location; and the technical evidence, training or service scope needed for approval.
ALC-ScientificLaboratory SystemsQuote List Request a Quote
